Sign in or create a free account to curate your search content.
1
00:00:04.950 --> 00:00:10.110
I am Domenica Queen. I have been working with
2
00:00:10.351 --> 00:00:15.660
Enrica to learn how to weave for the past two years.
3
00:00:15.990 --> 00:00:20.400
Right now, what I'm doing is weaving tape
4
00:00:21.600 --> 00:00:22.860
on a tape loom.
5
00:00:24.089 --> 00:00:29.040
This is a type of loom that would've been really common before the Industrial
6
00:00:29.161 --> 00:00:34.200
Revolution, and it is what many households would be
7
00:00:35.580 --> 00:00:39.120
making all of their bands and tapes on.
8
00:00:40.050 --> 00:00:43.170
Everything that you would need to tie down, everything that you would need to wrap
9
00:00:43.290 --> 00:00:47.220
up, all the containers to carry everything, all the clothes we wear.
10
00:00:48.810 --> 00:00:52.020
It is set up to tension these warp threads
11
00:00:53.761 --> 00:00:58.920
by having a lip that goes over the table, and then I'm at the other end of this
12
00:00:59.011 --> 00:01:01.950
loom, holding the threads in tension.
13
00:01:03.780 --> 00:01:07.500
This is an important feature of this loom.
14
00:01:07.590 --> 00:01:13.200
It hooks over the end of the table, and whenever you're tensioning your warp, you
15
00:01:13.260 --> 00:01:17.520
have to be able to pull against it a little bit in order to keep your threads in
16
00:01:17.610 --> 00:01:22.830
order and make sure that everything is going to
17
00:01:22.890 --> 00:01:28.711
be shifting correctly. This holds all of the warp that has been
18
00:01:28.801 --> 00:01:33.450
wound onto it. This is a mechanism for letting out more warp.
19
00:01:33.690 --> 00:01:34.890
So if I needed to,
20
00:01:36.391 --> 00:01:41.310
once I've woven a bit and I need to advance it, I take this out, and I will twist
21
00:01:41.370 --> 00:01:42.720
this forward or back
22
00:01:44.101 --> 00:01:47.910
to let more of the warp threads out.
23
00:01:49.051 --> 00:01:54.601
This mechanism here, it allows you to wind on what you've already made.
24
00:01:55.290 --> 00:01:59.730
These threads that are going vertically, they're called the warp threads.
25
00:02:00.870 --> 00:02:05.250
This thread that is going horizontally, this is the weft.
26
00:02:06.030 --> 00:02:09.780
So vertical threads are warp, horizontal threads are weft.
27
00:02:11.040 --> 00:02:12.060
Whenever you
28
00:02:13.470 --> 00:02:19.410
want to weave, what you're doing is you're creating a shed, and
29
00:02:19.440 --> 00:02:24.990
the shed is this space right here that separates one set of threads
30
00:02:25.650 --> 00:02:30.840
from another set of threads. This right here is a heddle.
31
00:02:31.440 --> 00:02:36.990
You can see this heddle has holes that are set up for a plain weave.
32
00:02:37.200 --> 00:02:41.700
Plain weave is when you're going under, over, under, over, under, over.
33
00:02:42.330 --> 00:02:47.280
So the holes here hold one shed open, and the slots let the rest of the threads
34
00:02:47.340 --> 00:02:52.921
travel up and down. So you can see that half the threads, roughly, are being held
35
00:02:52.980 --> 00:02:56.790
up right now, and that makes the space for my shuttle to go through.
36
00:02:57.720 --> 00:03:03.360
This little wooden guy that I'm holding is a shuttle, and it's what holds your
37
00:03:03.421 --> 00:03:07.110
weft while you're passing it back and forth through the different warp sheds.
38
00:03:07.860 --> 00:03:10.200
The size and shape matters a lot.
39
00:03:11.460 --> 00:03:15.781
One of the things, being able to push the threads back towards
40
00:03:17.130 --> 00:03:21.360
the weaving and get everything tight and sturdy depends on this edge being a little
41
00:03:21.390 --> 00:03:24.870
bit tapered, so Enrica did a lovely job tapering this edge.
42
00:03:25.410 --> 00:03:30.990
Also, being able to wind the threads on and have them stay, you have these notches
43
00:03:31.080 --> 00:03:36.870
here. The size of the shuttle is really important as you're weaving.
44
00:03:37.620 --> 00:03:43.260
This is really nice and small. Whenever I let out some thread, it is not giving me
45
00:03:43.590 --> 00:03:45.960
a yard that I have to then yank through.
46
00:03:46.590 --> 00:03:51.270
This is really about getting something that's comfortable that is going to minimize
47
00:03:51.300 --> 00:03:56.160
the motion. So here, I don't have six feet of thread coming out this way.
48
00:03:56.310 --> 00:04:02.220
I just have this little loopy guy, and then I'm going back the other way, and
49
00:04:02.250 --> 00:04:05.730
I'm kind of holding the tension at the edge with my fingers and holding it with my
50
00:04:05.791 --> 00:04:07.380
pinky so that it'll pull through.
51
00:04:08.580 --> 00:04:13.921
I will beat down, which pushes the previous thread down a little bit and
52
00:04:14.220 --> 00:04:17.580
makes the colors come to the front.
53
00:04:18.390 --> 00:04:21.601
This type of weaving is called a warp-faced weaving.
54
00:04:22.350 --> 00:04:27.000
The reason it's called a warp-faced weaving is that you are mostly seeing the
55
00:04:27.091 --> 00:04:31.080
patterning come from the warp threads.
56
00:04:31.680 --> 00:04:33.000
So this
57
00:04:34.290 --> 00:04:40.201
cute alternation between blue and brown is coming from how this was set up to begin
58
00:04:40.260 --> 00:04:42.060
with, so there's a lot of thought that comes to that.
59
00:04:42.720 --> 00:04:46.410
The weft, that is not really intended to be seen in this design.
60
00:04:46.620 --> 00:04:52.110
So whenever you have warp-faced weaving, that means that it's really
61
00:04:52.201 --> 00:04:56.130
pushing the warp threads so that that's what's showing off.
62
00:04:56.970 --> 00:05:02.520
You can also do weft-faced, where your threads are much more spread out, and you
63
00:05:02.610 --> 00:05:05.310
have a yarn that is going to push up
64
00:05:06.540 --> 00:05:11.520
from the left to right or horizontal threads up through to show off that design
65
00:05:11.580 --> 00:05:17.370
more. Part of what makes nice weaving is
66
00:05:17.400 --> 00:05:22.260
getting into a rhythm of things and not doing a lot of excess motions.
67
00:05:22.560 --> 00:05:27.300
So right now, you saw it was very simple. I lifted that up to get another shed.
68
00:05:28.080 --> 00:05:31.500
Now I'm going back this way. I'm just pushing this down,
69
00:05:33.120 --> 00:05:38.760
catching another shed. I'm pinching the edge here, holding tension with my
70
00:05:38.820 --> 00:05:41.400
finger to make sure that the thread is going through well.
71
00:05:42.660 --> 00:05:44.910
And then I'll do a few more passes.
72
00:05:47.130 --> 00:05:52.591
And it's very nice to get kind of into the relaxation
73
00:05:53.490 --> 00:05:56.190
of just passing it back and forth through the sheds.
74
00:05:57.600 --> 00:06:02.640
Now, I kind of started to get too tight on here, and so what I did was I just
75
00:06:02.670 --> 00:06:08.460
flipped my shuttle to let a little bit more of the fiber from
76
00:06:09.091 --> 00:06:14.820
the weft threads loose. As I'm weaving, I'm trying to make sure this edge here
77
00:06:14.910 --> 00:06:20.100
is forming up nicely. The threads that are on the outside, this is called the
78
00:06:20.220 --> 00:06:22.560
selvedge. That's the outer edge of your fabric.
79
00:06:23.130 --> 00:06:26.790
People spend a lot of time trying to make that very neat.
80
00:06:27.270 --> 00:06:33.151
So this weaving only has two sheds, the upper shed and the
81
00:06:33.210 --> 00:06:36.811
lower shed. When you get into more complex weaving,
82
00:06:38.040 --> 00:06:41.311
there are a lot more possibilities.
83
00:06:41.430 --> 00:06:45.780
It doesn't have to be this plain weave, under, over, under, over.
84
00:06:46.591 --> 00:06:50.550
I'm getting very close to this rigid heddle here,
85
00:06:51.870 --> 00:06:57.750
and so I'm going to put a slipknot on the end of this shuttle so it doesn't
86
00:06:57.841 --> 00:07:03.030
run away from me. There we go. And I'm going
87
00:07:03.151 --> 00:07:05.010
to take my stick out
88
00:07:07.320 --> 00:07:11.850
and let out more warp. So taking this off,
89
00:07:13.380 --> 00:07:19.230
and I don't have to get up and go around the loom and fuss with a bunch
90
00:07:19.290 --> 00:07:23.760
of stuff to do this. I think that's probably good.
91
00:07:24.270 --> 00:07:28.860
And so we've got much more weaving room, and then
92
00:07:30.451 --> 00:07:34.260
just advancing the tape
93
00:07:36.091 --> 00:07:37.770
so that I can tension it nicely,
94
00:07:39.690 --> 00:07:41.730
and I'm putting the brake back on.
95
00:07:43.140 --> 00:07:45.930
Now I have my trusty stick. This is a very good clamp.
96
00:07:46.350 --> 00:07:48.000
That way, you're not stuck to your weaving.
97
00:07:49.680 --> 00:07:54.300
I'm putting it under my apron strings. You can also do this with a belt.
98
00:07:54.360 --> 00:07:58.020
You can do this with a long stick in your blue jean belt loops.
99
00:07:59.070 --> 00:08:04.140
It does take a long time to weave, and it's no fun being uncomfortable when you're
100
00:08:04.201 --> 00:08:06.480
doing something that takes hours and hours.
101
00:08:07.110 --> 00:08:09.720
You have to make your tools really effective.
By the People: Conversations Beyond 250 is a series of community-driven programs created by humanities councils in collaboration with local partners. The initiative was developed by the Federation of State Humanities Councils and the Smithsonian Center for Folklife and Cultural Heritage.
Fiber Artist/Speaker: Domenica Queen
Project Support: Federation of State Humanities Councils
Project Directors: Dr. Jennie S. Williams and Stan Bumgardner
Assistant Editor: Olivia Nestor
On-Site Photographer: Michael Keller